Looking for new TT to replace Rega P3 - [胆机&DIY] - 发烧HIFI音响论坛 - Powered by Discuz!
返回列表 回复 发帖

Looking for new TT to replace Rega P3

As titled.

My current setup used for more than 1o years and they are Rega P3 with new power supply P24 with AT OC9 and RB300.

Any other TT suggestion ?

Lamma
首先,價錢先決
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
Linn LP12如何?
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
my budget for TT only ... around 15K
after initial check on current price of LP12, it seems much more than 15K, except source from 2nd market. :(
after initial check on current price of LP12, it seems much more than 15K, except source from 2nd market. :(
lamma 发表于 2013-2-15 12:04
其實二手亦不怕,那盤通常只有一個問題,就是要換皮帶!
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
how about clearaudio ?
Banny, can talk more about 正切唱臂 ?
What about the different between 9' and 12' 唱臂 ?
What is the different between 軸承臂 and 單點臂 ?
how about clearaudio ?
lamma 发表于 2013-2-15 19:56
給我的感覺是用得太多膠"亞加力"
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
Banny, can talk more about 正切唱臂 ?
lamma 发表于 2013-2-15 19:57
通常有主動或被動式。主動是sensor+馬達去推動,好處阻力少,壞處修正時影響聲音;被動式有行軸承+軌或氣浮式,氣浮式不錯但可能氣泵有聲。
正切式沒有角度問題也不用加反偏壓,但好的正切式不便宜,上述問題不可勿視!
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
What about the different between 9' and 12' 唱臂 ?
lamma 发表于 2013-2-15 19:58
9"較便宜,有效質量較輕,大部份盤都可裝,但角度誤差較大;12"剛相反
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
What is the different between 軸承臂 and 單點臂 ?
lamma 发表于 2013-2-15 22:39
軸承通常有垂直與水平軸承,單點只得一點,是利用地心吸力去取得唱重與平衡,個人不太喜歡單點,因為不易做好反偏壓,穩定性亦較低。當然也有例外的!
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
沒有下文?
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
國產的氣浮正切臂+氣浮盤可以做到10K以下連氣泵,如果聲音是可以的話就真是好了,不知有沒有人聽過?
平凡如常過,不識體人心;
深情盡內歛,細意藏腦深!
返回列表